CE Level 1 vs Level 2 Motorcycle Armour: What's the Difference?
Almost every motorcycle jacket and race suit says it has "CE armour". That tells you the armour passed a test, but not how well it did. The number after it, Level 1 or Level 2, is the part worth checking.
Here's what the levels mean, how the test works, and what to look for on the label.
The short answer
Level 2 armour lets less of the impact through to your body. Both levels pass the same test, but Level 2 has to pass it with a much lower result. If you're choosing between the two, Level 2 gives you more protection.
How the test works
Armour for the shoulders, elbows, hips and knees is tested under the European standard EN 1621-1. A 5 kg striker is dropped onto the armour with 50 joules of energy, and a sensor underneath measures how much force gets through. The lower the number, the better.
- Level 1: average transmitted force of 35 kN or less, with no single hit above 50 kN.
- Level 2: average transmitted force of 20 kN or less.
That's a big difference. Level 2 armour has to let through well under two thirds of the force that Level 1 is allowed to.
Back protectors use a different test
Back protectors are tested under EN 1621-2, with tighter limits because the spine is more vulnerable:
- Level 1: average of 18 kN or less, with no single hit above 24 kN.
- Level 2: average of 9 kN or less, with no single hit above 12 kN.
You'll also see CB (central back) or FB (full back) on the label, which tells you how much of your back it covers.
How to read the label
Certified armour carries the CE mark, the standard number (EN 1621-1 or EN 1621-2) and the level, usually as a 1 or a 2. Back protectors add CB or FB. If a seller can't tell you the standard and the level, assume the armour hasn't been tested.
We publish the certificate numbers for the armour in our suits on our armour certifications page.
Armour rating vs suit rating
This is where a lot of buyers get confused. EN 1621 tests the armour on its own. A separate standard, EN 17092, tests the whole garment, including how well the leather resists abrasion and how strong the seams are. It rates a garment from AAA (the highest) down to C.
So a suit can have certified Level 2 armour without the complete suit carrying an EN 17092 class. That's the case with our suits, and we'd rather say so plainly. What we can tell you is what goes into them: 1.2–1.3 mm top-grade cowhide (or kangaroo as an upgrade), reinforced seams at the high-stress points, and CE Level 2 armour at the shoulders, elbows and knees.
Fit matters as much as the level
Level 2 armour does nothing if it slides off your elbow when you hit the ground. In a loose suit, that's exactly what happens. The armour has to sit on the joint with your arms out and your knees bent in a riding position. Read how a race suit should fit and the sizing mistakes to avoid before you order.
Riding with an airbag vest as well? Our airbag guide explains how to make room for it.
Common questions
Is CE Level 2 armour better than Level 1?
Yes, in the test that matters. Level 2 armour lets through much less force when it's hit. For shoulder, elbow, hip and knee armour, Level 2 has to keep the average transmitted force at 20 kN or less, against 35 kN or less for Level 1.
Is Level 2 armour less comfortable?
It used to be thicker and stiffer. Modern Level 2 armour is often soft and flexible until it takes a hit, so the comfort gap is much smaller than it was. Fit matters more: armour only works if the suit holds it on the joint.
What's the difference between CE armour and a CE-rated suit?
Armour is tested on its own under EN 1621. A whole garment can be tested under EN 17092, which rates the suit as AAA, AA, A, B or C. A suit can have certified Level 2 armour without the complete garment being EN 17092 classified.
Do I need Level 2 armour for track days?
Track day rules usually focus on the suit itself, a one-piece or a two-piece that zips together, rather than the armour level. Club racing rules vary, so check yours. For the small price difference, we'd always choose Level 2.
Our suits
Every Leathers First race suit and jacket comes with CE Level 2 armour as standard. Browse men's race suits, women's race suits and race jackets, or ask us on WhatsApp about the armour in a specific suit.